LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> LS 500 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Cruise Control System - Service Information) >> Millimeter Wave Radar Sensor >> Removal [12/2017 - 09/2018] >> Procedure

Removal [12/2017 - 09/2018]: Procedure

WARNING: This page is about a different car, the 2020 Lexus LS 500, 2019 Lexus LS 500, and 2018 Lexus LS 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT BUMPER ASSEMBLY 
    1. for except Sport Package:

      Refer to REMOVAL [12/2017 - 09/2018]

    2. for Sport Package:

      Refer to REMOVAL [12/2017 - 09/2018]

  2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (for Stereo Camera Type) 
    NOTE:

    Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.

    1. Remove the 2 bolts and screw.
      GTY789180Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Guide
      Screw
      Bolt
    2. Detach the guide and remove the millimeter wave radar sensor assembly.
  3. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (for Mono Camera Type) 
    NOTE:

    Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.

    1. Remove the 2 bolts and 2 screws.
      GTY837424Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Screw
      Bolt
    2. Detach the guide and remove the millimeter wave radar sensor assembly.
scientia non olet · About LEMON Manuals