Installation [03/2017 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
- INSTALL NO. 2 ECM BRACKET
- Install the No. 2 ECM bracket to the ECM with the 2 screws.
Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf)
- Install the No. 2 ECM bracket to the ECM with the 2 screws.
- INSTALL NO. 1 ECM BRACKET
- Install the No. 1 ECM bracket to the ECM with the 2 screws.
Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf)
- Install the No. 1 ECM bracket to the ECM with the 2 screws.
- INSTALL ECM
- Install the ECM with the bolt and nut.NOTE:
If the ECM has been struck or dropped, replace it.
Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
- Connect the 2 ECM connectors.NOTE:
- When connecting the connectors, make sure that dirt, water or other foreign matter does not become stuck between the connectors and other parts.
- Make sure that the 2 levers are securely locked.
- Install the ECM with the bolt and nut.
- INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
Refer to INSTALLATION [03/2017 - ]
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL