LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> LC 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Emission Control System - Service Information (Coupe)) >> Purge Valve >> Removal [03/2017 - ] >> Procedure

Removal [03/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 2 [03/2017 - 05/2023] , or refer to PROCEDURE - Step 2 [05/2023 - 09/2023] , or refer to PROCEDURE - Step 2 [09/2023 - ]

  2. REMOVE PURGE VSV 
    1. Detach the clamp and disconnect the wire harness from the wire harness bracket.
      GTY775453Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and wire harness bracket from the intake air surge tank assembly.
    3. Slide the clip and disconnect the fuel vapor feed hose from the purge VSV.
      GTY803216Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Fuel Vapor Feed Hose
      *2 No. 1 Fuel Vapor Feed Hose
    4. Slide the clip and disconnect the No. 1 fuel vapor feed hose from the purge VSV.
    5. Disconnect the purge VSV connector.
    6. Remove the bolt and purge VSV from the intake air surge tank assembly.
scientia non olet · About LEMON Manuals