Removal [03/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT DOOR ASSIST GRIP ASSEMBLY RH
Refer to PROCEDURE - Step 8 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 8 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 8 [04/2020 - 05/2023] , or refer to DISASSEMBLY [05/2023 - ]
REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH
Refer to PROCEDURE - Step 10 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 10 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 10 [04/2020 - 05/2023] , or refer to DISASSEMBLY [05/2023 - ]

REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY

Disconnect the connector.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the 7 screws of the backside of the front door trim board sub-assembly RH.

Remove the screw of the face of the front door trim board sub-assembly RH.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Remove the power window regulator switch assembly with the No. 1 switch base as shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Remove in this Direction (1)
	Remove in this Direction (2)

Remove the 2 screws.

Detach the guide and remove the No. 2 switch base from the No. 1 switch base.

Using a thin-bladed screwdriver, detach the claw and remove the power window regulator switch assembly from the No. 2 switch base.

HINT:

Tape the thin-bladed screwdriver tip before use.