Inspection [09/2020 - ]: Procedure
- INSPECT LUGGAGE ELECTRICAL KEY SWITCH (TELEVISION CAMERA ASSEMBLY)
- Check the resistance.
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Luggage Electrical Key Switch (Television Camera Assembly))Standard Resistance
Tester Connection Condition Specified Condition 10 (E) - 5 (UL) Switch not pushed 10 kΩ or higher Switch pushed Below 1 Ω If the result is not as specified, replace the luggage electrical key switch (television camera assembly).
- Measure the resistance according to the value(s) in the table below.
- Check the resistance.