LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> IS 350 RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) - Service Information (2 Of 2) >> Luggage Compartment Door Opener Inner Switch >> Inspection [04/2013 - 09/2020] >> Procedure

Inspection [04/2013 - 09/2020]: Procedure

  1. INSPECT LUGGAGE DOOR OPENING SWITCH ASSEMBLY 
    1. Check the resistance.
      GTY463866Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Luggage Door Opening Switch Assembly)
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        4 (B) - 1 (L) Switch not pushed 10 kΩ or higher
        Switch pushed Below 1 Ω

        If the result is not as specified, replace the luggage door opening switch assembly.

    2. Inspect the illumination.
      1. Apply battery voltage to the luggage door opening switch assembly connector, and check that the luggage door opening switch assembly LED illuminates.

        OK

        Connection Specified Condition
        Battery positive (+) → Terminal 3 (ILL+)
        Battery negative (-) → Terminal 2 (ILL-)        		 LED illuminates

        If the result is not as specified, replace the luggage door opening switch assembly.

scientia non olet · About LEMON Manuals