LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> IS 350 RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) - Service Information (2 Of 2) >> Fuel Lid Opener Motor Assembly >> Removal [08/2015 - 09/2020] >> Procedure

Removal [08/2015 - 09/2020]: Procedure

  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT 

    See step  4

  2. REMOVE SPARE WHEEL COVER TRAY LH 

    See step  5

  3. REMOVE DECK SIDE TRIM BOX LH 

    See step  7

  4. REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER 

    See step  9

  5. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER 

    See step  10

  6. REMOVE REAR SEAT ASSEMBLY 

    Refer to REMOVAL [04/2013 - 10/2016] , or refer to REMOVAL [10/2016 - 09/2020]

  7. REMOVE REAR SEAT SUB FLOOR PANEL 

    Refer to PROCEDURE - Step 10

  8. REMOVE NO. 2 ROOM PARTITION COVER 

    Refer to PROCEDURE - Step 11

  9. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 1

  10. REMOVE FRONT UPPER LUGGAGE COMPARTMENT TRIM COVER 

    See step  16

  11. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH 

    See step  17

  12. REMOVE FUEL LID LOCK WITH MOTOR ASSEMBLY 
    1. Disconnect the connector.
      GTY464340Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp.
    3. Disengage the claw and remove the fuel lid lock with motor assembly.
scientia non olet · About LEMON Manuals