Installation [08/2021 - ]: Procedure
- INSTALL AIR CONDITIONING CONTROL ASSEMBLY
- Connect the connector.
- As shown in the illustration, push the rib of the air conditioning control assembly toward the lower part of No. 2 instrument panel register assembly.
*a Rib of Air Conditioning Control Assembly *b Lower Part of No. 2 Instrument Panel Register Assembly - Engage the 2 guides and 2 clips as shown in the illustration.
Install in this Direction - Engage the 5 guides and 12 clips to install the air conditioning control assembly.
- INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Headup Display)
Refer to PROCEDURE - Step 28
- INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Headup Display)
Refer to PROCEDURE - Step 29
- INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING
Refer to PROCEDURE - Step 30
- INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 33
- INSTALL INSTRUMENT SIDE PANEL RH
Refer to PROCEDURE - Step 37
- INSTALL FRONT DOOR OPENING TRIM COVER RH
HINT:
Use the same procedure as for the LH side.
Refer to PROCEDURE - Step 46
- INSTALL COWL SIDE TRIM BOARD RH
HINT:
Use the same procedure as for the LH side.
Refer to PROCEDURE - Step 32
- INSTALL FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedure as for the LH side.
Refer to PROCEDURE - Step 33