LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> ES 300h Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Hybrid Transaxle System (P710) - Service Information >> Shift Paddle Switch >> Removal [09/2022 - ] >> Procedure

Removal [09/2022 - ]: Procedure

  1. REMOVE STEERING WHEEL ASSEMBLY 

    Refer to REMOVAL [09/2022 - ]

  2. REMOVE STEERING PAD SWITCH ASSEMBLY 

    Refer to REMOVAL [09/2022 - ]

  3. REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) 
    1. Remove the 2 screws.
      GTY809669Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 4 claws.
      GTY809665Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 2 clamps to disconnect the 2 shift paddle switches (transmission shift switch assemblies) from the steering wheel assembly.
      GTY809666Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disconnect the 2 shift paddle switch (transmission shift switch assembly) connectors to remove the 2 shift paddle switches (transmission shift switch assemblies) from the No. 1 switch wire.
      GTY809663Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 1 SWITCH WIRE 

    HINT: 

    Perform this procedure only when replacement of the No. 1 switch wire is necessary.

    1. Disengage the 4 guides and remove the No. 1 switch wire from the steering wheel assembly.
      GTY834838Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals