LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> ES 250 Base >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance - Service Information >> A25A-FXS Auxiliary Battery >> Installation [06/2018 - ] >> Procedure

Installation [06/2018 - ]: Procedure

  1. INSTALL AUXILIARY BATTERY 
    1. Install the auxiliary battery.
    2. Install the No. 3 battery clamp with the bolt.
      GTY818647Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction

      Torque: 16.5 N*m (168 kgf*cm, 12 ft.*lbf) 

    3. Connect the battery hose to the auxiliary battery.
      NOTE:
      • Do not twist the battery hose.
      • Push the battery hose onto the auxiliary battery until a click sound is heard.
    4. Connect the cable to the positive (+) auxiliary battery terminal and tighten the nut.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    5. Engage the 2 claws to close the battery terminal connector cover.
  2. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 
    1. Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

      NOTE:

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

      Refer to INITIALIZATION [06/2018 - 10/2019] , or refer to INITIALIZATION [10/2019 - 08/2020] , or refer to INITIALIZATION [08/2020 - 08/2021] , or refer to INITIALIZATION [08/2021 - 09/2022] , or refer to INITIALIZATION [09/2022 - ]

    2. Return the luggage compartment trim cover RH to its original position.
scientia non olet · About LEMON Manuals