Installation [06/2018 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 300h, 2023 Lexus ES 300h, 2022 Lexus ES 300h, 2021 Lexus ES 300h, and 2020 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL NO. 1 SWITCH WIRE

HINT:

Perform this procedure only when replacement of the No. 1 switch wire is necessary.

Engage the 4 guides to install the No. 1 switch wire to the steering wheel assembly.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*a	No. 1 Switch Wire

NOTE:

Make sure that the junction of the No. 1 switch wire is the right of the guide as shown in the illustration.

INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)
1. Connect the 2 shift paddle switch (transmission shift switch assembly) connectors to install the 2 shift paddle switches (transmission shift switch assemblies) to the No. 1 switch wire.
2. Engage the 2 clamps.
3. Engage the 4 claws to install the 2 shift paddle switches (transmission shift switch assemblies) to the steering wheel assembly.
4. Install 2 new screws.
  Torque: 1.7 N.m (17 kgf/cm, 15 in.lbf)
INSTALL STEERING PAD SWITCH ASSEMBLY
Refer to INSTALLATION [06/2018 - ]
INSTALL STEERING WHEEL ASSEMBLY
Refer to INSTALLATION [06/2018 - 08/2020] , or refer to INSTALLATION [08/2020 - ]