Removal [06/2018 - ]: Procedure

Refer to PROCEDURE - Step 2 [06/2018 - 10/2019] , or refer to PROCEDURE - Step 2 [10/2019 - 08/2021] , or refer to PROCEDURE - Step 2 [08/2021 - 09/2022] , or refer to PROCEDURE - Step 2 [09/2022 - ]

1. for Manual Tilt and Manual Telescopic Steering Column:
   1. Release the tilt and telescopic lever and fully extend and lower the steering column assembly.
   2. Lock the tilt and telescopic lever.
2. Turn the steering wheel assembly to the left and remove the screw.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Turn the steering wheel assembly to the right and remove the screw.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

4. Remove the screw.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

5. Push the lower steering column cover sub-assembly and disengage the 2 claws as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Push

6. Disengage the 2 claws to remove the lower steering column cover sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disengage the claw to separate the upper steering column cover as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

2. Disengage the 2 claws and 4 clips to remove the upper steering column cover.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Protective Tape
   	Remove in this Direction

   NOTE:

   If the claw is pulled with excessive force, it may break.