Caution / Notice / Hint
NOTE:
- Although DTC C060E-2A may be stored after entering pad replacement mode, this is not a malfunction.
- Although DTC C060E-2A may be stored after forcibly releasing the parking brake, this is not a malfunction.
- The electric parking brake may still operate up to 20 seconds after the power switch is turned off. Before disconnecting connectors or fuses, turn the power switch off and wait 20 seconds or more.
- The parking brake indicator light blinks when the power switch is turned on (IG) after replacing the parking brake ECU (brake actuator assembly). Operate the electric parking brake switch assembly to turn off the parking brake indicator light.