LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> UX 250h Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System (Diagnostic Codes (4 Of 4) & Circuit Tests) (Hybrid) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model) >> ABS Warning Light Remains ON [10/2018 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • After replacing the skid control ECU (brake booster with master cylinder assembly), perform linear solenoid valve offset learning, ABS holding solenoid valve learning, yaw rate and acceleration sensor zero point calibration and system information memorization after performing "Reset Memory".

    Refer to INITIALIZATION [10/2018 - ]

  • Inspect the fuses for circuits related to this system before performing the following procedure.
  • Before performing this procedure, depress the brake pedal and confirm that the stop lights illuminate.
scientia non olet · About LEMON Manuals