On-Vehicle Inspection [10/2018 - 07/2022]: Procedure
- WARNING LIGHT AND INDICATOR LIGHT INITIAL CHECK
- When the engine switch is turned on (IG), check that the ABS warning light, brake warning light / red (malfunction), slip indicator light, VSC OFF indicator light, brake hold standby indicator light and brake hold operated indicator light come on for approximately 3 seconds.
HINT:
If the warning lights and indicator lights do not illuminate or illuminate for more than approximately 3 seconds, perform troubleshooting for the electronically controlled brake system.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - 07/2022]
- When the engine switch is turned on (IG), check that the ABS warning light, brake warning light / red (malfunction), slip indicator light, VSC OFF indicator light, brake hold standby indicator light and brake hold operated indicator light come on for approximately 3 seconds.