LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> UX 200 Luxury >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) (Diagnostic Codes) (1 Of 2) >> Lighting System >> DTC B2456: Left Headlight ECU Variation Error [07/2022 - ] >> Procedure

DTC B2456: Left Headlight ECU Variation Error [07/2022 - ]: Procedure

  1. CONFIRM MODEL 
    1. Choose the model to be inspected.

      Result

      Result Proceed to
      for Triple Beam Headlight A
      for Single Beam Headlight B

    Result: 

    See step  4

    Result: 

    See step  2

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / AFS / Trouble Codes.
    5. Clear the DTCs.

      Body Electrical > AFS > Clear DTCs 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  3

  3. CHECK FOR DTC 
    1. Enter the following menus: Body Electrical / AFS / Trouble Codes.
    2. Check for DTCs.

      Body Electrical > AFS > Trouble Codes 

      OK

      DTC B2456 is not output.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - ] 

    Result: 

    NG 

    See step  6

  4. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.
    5. Clear the DTCs.

      Body Electrical > HL AutoLeveling > Clear DTCs 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  5

  5. CHECK FOR DTC 
    1. Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.
    2. Check for DTCs.

      Body Electrical > HL AutoLeveling > Trouble Codes 

      OK

      DTC B2456 is not output.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - ] 

    Result: 

    NG 

    See step  6

  6. CHECK HYBRID VEHICLE CONTROL ECU 
    1. Check if the part number of the hybrid vehicle control ECU installed to the vehicle is correct.

      OK

      Part number is correct.

      Result

      Proceed to
      OK
      NG

    Result: 

    NG 

    REPLACE HYBRID VEHICLE CONTROL ECU. Refer to  REMOVAL [07/2022 - ] 

    Result: 

    OK 

    See step  7

  7. CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) 
    1. Check if the part number of the main body ECU (multiplex network body ECU) installed to the vehicle is correct.

      OK

      Part number is correct.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE NO. 1 HEADLIGHT ECU SUB-ASSEMBLY LH. Refer to  REMOVAL [10/2018 - ] 

    Result: 

    NG 

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to  REMOVAL [07/2022 - ]