Panel Bonding Adhesive - Crib # 158 (T-CRIB-158)
Publication date: 2022-01-01Reference number: T-CRIB-158
PANEL BONDING ADHESIVE - CRIB # 158
COLLISION REPAIR INFORMATION
Reference Number(s): T-CRIB-158, Date of Issue:
January 01, 2022
| TOYOTA: | All Toyota, Lexus, Scion |
| SECTION: | Non-Structural Exterior |
BACKGROUND
The application or use of panel bonding adhesive on Toyota, Lexus, and Scion vehicles is limited to documented procedures published in model-specific repair manuals for collision damage. The provided illustration is an example of weld-on component replacement specifications that require STRSW (Squeeze-Type Resistant Spot Welding) through adhesive material. Please review detailed component replacement instructions and procedures published in model-specific repair manuals thoroughly as part of your repair plan.
INSTALLATION POINT
- Apply adhesive (3M™ Automix™ Panel Bonding adhesive #8115) to area indicated by *1.
- Perform STRSW on the flange indicated by *2.
PRECAUTION
Panel bonding for weld-on component replacement is not an approved procedure.
DEFINITIONS
- Panel bonding-A substitution of any specified welds with adhesive material.
- Weld bonding-STRSW through adhesive material.
For more information on this and other important collision repair topics visit the Toyota Technical Information System (TIS)