Meter Illumination is Always Dark [10/2018 - 07/2022]: Procedure

1. Check if CAN communication DTCs are output.
   1. for HV Model:

      Refer to DIAGNOSIS SYSTEM [10/2018 - 10/2019] Refer to DIAGNOSIS SYSTEM [10/2019 - 08/2021] Refer to DIAGNOSIS SYSTEM [08/2021 - 07/2022]

   2. for Gasoline Model:

      Refer to DIAGNOSIS SYSTEM [10/2018 - 10/2019] Refer to DIAGNOSIS SYSTEM [10/2019 - 07/2022]

   Result

   Result	Proceed to
   CAN communication DTCs are not output.	A
   CAN communication DTCs are output. (for HV Model)	B
   CAN communication DTCs are output. (for Gasoline Model)	C

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - ] 

Result: 

C 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2018 - 07/2022] 

Result: 

A 

See step  2

1. Check if lighting system DTCs are output.

   Refer to DTC CHECK / CLEAR [10/2018 - ]

   Body Electrical > Main Body > Trouble Codes 

   Result

   Result	Proceed to
   DTC B1244 is not output.	A
   DTC B1244 is output.	B

Result: 

B 

GO TO DTC B1244. Refer to  DTC B1244: Light Sensor Circuit [10/2018 - 07/2022] 

Result: 

A 

See step  3

1. Replace the combination meter assembly with a new one.

   Refer to REMOVAL [10/2018 - 07/2022]

2. Check the operation.

   Refer to ON-VEHICLE INSPECTION [10/2018 - 07/2022] 

   OK

   The operation of the combination meter assembly returns to normal.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

END (COMBINATION METER ASSEMBLY WAS DEFECTIVE) 

Result: 

NG 

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to  REMOVAL [10/2018 - 07/2022]