DTC B1500-13: Fuel Sender Circuit Open [10/2018 - 07/2022]: Description

This DTC is stored when the combination meter assembly detects a fuel sender gauge assembly malfunction via a direct line.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
B150013	Fuel Sender Circuit Open	Diagnosis Condition: The ignition switch is ON IG power source voltage is 9.5 V or more Malfunction Status: Voltage signal from fuel sender gauge assembly is 0.2 V or less 3 times consecutively Voltage signal from fuel sender gauge assembly is 4.7 V or more 3 times consecutively	Harness or connector Fuel sender gauge assembly Fuel suction tube with pump and gauge assembly Combination meter assembly

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B150013

Fuel Sender Circuit Open

Diagnosis Condition:

Malfunction Status:

Voltage signal from fuel sender gauge assembly is 0.2 V or less 3 times consecutively
Voltage signal from fuel sender gauge assembly is 4.7 V or more 3 times consecutively

DTC DETECTION CONDITIONS

		Vehicle Condition
		Pattern 1	Pattern 2
Diagnosis Condition	Ignition switch ON	◦	◦
Malfunction Status	Voltage signal from fuel sender gauge assembly is 0.2 V or less	◦	-
Malfunction Status	Voltage signal from fuel sender gauge assembly is 4.7 V or more	-	◦
Detection Time		3 times consecutively	3 times consecutively
Number of Trips		1 trip	1 trip

HINT:

DTC will be output when conditions for either of the patterns in the table above are met.