LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> UX 200 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seats (Service Information) >> Seat Heater Control >> Removal [07/2022 - ] >> Procedure

Removal [07/2022 - ]: Procedure

  1. REMOVE FRONT SEAT ASSEMBLY 

    Refer to REMOVAL [07/2022 - ] 

  2. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY 
    1. Disconnect the connector.
      GTY834327Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
      Remove in this Direction
    2. Using a screwdriver with its tip wrapped with protective tape, disengage the claw to remove the seat heater control sub-assembly as shown in the illustration.
scientia non olet · About LEMON Manuals