LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> UX 200 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Park Assist / Monitoring (Service Information) >> CLEARANCE WARNING BUZZER (for Front Side) >> Inspection [10/2018 - ] >> Procedure

Inspection [10/2018 - ]: Procedure

  1. INSPECT NO. 1 CLEARANCE WARNING BUZZER 
    1. Check the resistance.
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        1 (Z+) - 2 (Z-) Always 750 Ω
        GTY837714Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without Harness Connected
        (No. 1 Clearance Warning Buzzer)

        If the result is not as specified, replace the No. 1 clearance warning buzzer.

scientia non olet · About LEMON Manuals