Caution / Notice / Hint
NOTE:
- Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Refer to PRECAUTION [10/2018 - 10/2019]
- When replacing the navigation ECU, always replace it with a new one. If a navigation ECU which was installed to another vehicle is used, the following may occur:
- A communication malfunction DTC may be stored.
- The navigation ECU may not operate normally.
- Check that the antenna cord sub-assembly is properly installed and does not have any sharp bends, pinching or loose connections before performing following procedure.