Caution / Notice / Hint
NOTE:
- Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
- for HV Model
Refer to REGISTRATION [10/2018 - 10/2019] Refer to REGISTRATION [10/2019 - 07/2022]
- for Gasoline Model
Refer to REGISTRATION [10/2018 - 10/2019] Refer to REGISTRATION [10/2019 - 07/2022]
- for HV Model
- Before replacing the Hybrid Vehicle Control ECU, refer to Registration.*1
Refer to REGISTRATION [10/2018 - 10/2019] Refer to REGISTRATION [10/2019 - 07/2022]
- Before replacing the ECM, refer to Registration.*2
Refer to REGISTRATION [10/2018 - 07/2022]
- If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the No. 1 headlight ECU sub-assembly LH.*3
Refer to INITIALIZATION [10/2018 - 10/2020] Refer to INITIALIZATION [10/2020 - ]
- If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to initialize the No. 1 headlight ECU sub-assembly LH.*4
Refer to INITIALIZATION [10/2018 - 10/2020] Refer to INITIALIZATION [10/2020 - ]
- When replacing the No. 1 headlight ECU sub-assembly LH, always replace it with a new one. If a No. 1 headlight ECU sub-assembly LH which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
- *1: for HV Model
- *2: for Gasoline Model
- *3: for Triple Beam Headlight
- *4: for Single Beam Headlight