LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> UX 200 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Clock >> Removal [10/2018 - 07/2022] >> Procedure

Removal [10/2018 - 07/2022]: Procedure

  1. REMOVE MULTI-DISPLAY 

    Refer to REMOVAL [10/2018 - 07/2022]

  2. REMOVE CLOCK ASSEMBLY 
    NOTE:

    When removing the clock assembly, make sure that no dust, etc., enters the inside of the multi-display.

    1. Using a screwdriver with its tip wrapped in protective tape, disengage the claws and guide to remove the clock assembly as shown in the illustration.
      GTY831527Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape
      Remove in this Direction
scientia non olet · About LEMON Manuals