Headup Display Communication Stop Mode [10/2018 - 07/2022]: Description

Detection Item	Symptom	Trouble Area
Headup Display Communication Stop Mode	Any of the following conditions are met: Communication stop for "Head Up Display" is indicated on the "Communication Bus Check" screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [10/2018 - 10/2019] Refer to PROBLEM SYMPTOMS TABLE [10/2019 - 08/2021] Refer to PROBLEM SYMPTOMS TABLE [08/2021 - 07/2022] Communication stop history for "Head Up Display" is indicated on the "Communication Bus Check (Detail)" screen of the Techstream. (The Lost Communication Time value for "Head Up Display" is 6 or more.) Refer to PROBLEM SYMPTOMS TABLE [10/2018 - 10/2019] Refer to PROBLEM SYMPTOMS TABLE [10/2019 - 08/2021] Refer to PROBLEM SYMPTOMS TABLE [08/2021 - 07/2022] Communication system DTCs (DTCs that start with U) that correspond to "Headup Display Communication Stop Mode" in "DTC Combination Table" are output. Refer to DTC COMBINATION TABLE [10/2018 - 10/2019] Refer to DTC COMBINATION TABLE [10/2019 - 07/2022]	Meter mirror sub-assembly branch line or connector Power source circuit of meter mirror sub-assembly Meter mirror sub-assembly ground circuit Meter mirror sub-assembly