LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> UX 200 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Acoustic Vehicle Alerting System (Diagnostics - Introduction) >> Acoustic Vehicle Alerting System >> Terminals Of Ecu [08/2021 - 07/2022] >> Terminals Of Ecu [08/2021 - 07/2022]

Terminals Of Ecu [08/2021 - 07/2022]

  1. CHECK VEHICLE APPROACHING SPEAKER CONTROLLER 
    GTY965631Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the N115 vehicle approaching speaker controller connector.
    2. Measure the voltage according to the value(s) in the table below.
      Terminal No. (Symbol) Wiring Color Terminal Description Switch Condition Specified Condition
      N115-1 (IG) - Body ground BE - Body ground IG power supply Power switch off Below 1 V
      Power switch on (IG) 11 to 14 V
      N115-6 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
    3. Connect the N115 vehicle approaching speaker controller connector.
    4. Measure the resistance according to the value(s) in the table below.
      Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
      N115-7 (SP+) - N115-8 (SP-) R - G Vehicle approaching speaker output Vehicle approaching speaker operating A waveform synchronized with the sound is output. (See Waveform 1)
      N115-3 (CANH) - N115-6 (GND) Y - W-B CAN communication line Power switch on (IG) Pulse generation
      N115-4 (CANL) - N115-6 (GND) W - W-B CAN communication line Power switch on (IG) Pulse generation
      1. Waveform 1
        Fig 1: Waveform 1
        GTY776323Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        Item Condition
        Tester Connection N115-7 (SP+) - N115-8 (SP-)
        Tool setting 1 V/DIV., 500 ms./DIV.
        Vehicle condition Vehicle approaching speaker operating
scientia non olet · About LEMON Manuals