Installation [09/2015 - ]: Procedure

INSTALL HEADUP DISPLAY SWITCH ASSEMBLY (INTEGRATION CONTROL AND PANEL ASSEMBLY)

Engage the 4 claws as shown in the illustration to install the headup display switch assembly (integration control and panel assembly).

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install in this Direction

INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 33 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 33 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 30 [08/2019 - ]
CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 34 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 34 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 31 [08/2019 - ]
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 35 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 35 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 32 [08/2019 - ]
INSTALL COWL SIDE TRIM BOARD LH
Refer to PROCEDURE - Step 2 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 2 [12/2017 - ]
INSTALL FRONT DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 43 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 42 [12/2017 - ]
INSTALL INSTRUMENT PANEL GARNISH LH
Refer to PROCEDURE - Step 38 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 38 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 35 [08/2019 - ]