Caution / Notice / Hint
NOTE:
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
Refer to REGISTRATION [09/2014 - 03/2019]
HINT:
- The meter illumination dims when the taillights are turned on.
- Setting the meter illumination level to maximum brightness cancels the above dimming of the meter illumination.
- Setting the meter illumination level to minimum brightness turns off the meter illumination.
- The automatic light control sensor sensitivity can be customized.
for Triple Beam Headlight: Refer to CUSTOMIZE PARAMETERS [09/2014 - 11/2017] , or refer to CUSTOMIZE PARAMETERS [11/2017 - 03/2019]
for Single Beam Headlight: Refer to CUSTOMIZE PARAMETERS [09/2014 - 11/2017] , or refer to CUSTOMIZE PARAMETERS [11/2017 - 03/2019]