DTC B1321: Lost Communication with EMV; DTC B1323: Lost Communication with Haptic Device; DTC B1324: Lost Communication with Meter; DTC B1563: Haptic Device Disconnected [09/2014 - 11/2017]: Description
These DTCs are stored when communication between the radio receiver assembly and remote touch (remote operation controller assembly) or combination meter assembly is not possible.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B1321 | Lost Communication with EMV | The radio receiver assembly cannot receive data from the remote touch (remote operation controller assembly). |
|
| B1323 | Lost Communication with Haptic Device | The remote touch (remote operation controller assembly) cannot receive data from the radio receiver assembly. |
|
| B1324 | Lost Communication with Meter | After the radio receiver assembly receives a registration information signal, which is sent by the combination meter assembly when the engine switch is on (IG), 1 or more times, the radio receiver assembly cannot receive the signal for 30 seconds or more |
|
| B1563 | Haptic Device Disconnected | The remote touch (remote operation controller assembly) is/was not connected while the engine switch is/was on (ACC) or on (IG). |
|