Caution / Notice / Hint
NOTE:
- After the power switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Refer to PRECAUTION [05/2019 - ]
- When disconnecting and reconnecting the auxiliary battery
Refer to WORK PROCEDURE [05/2019 - ]
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
- After replacing the airbag ECU assembly, refer to initialization.
Refer to WORK PROCEDURE [05/2019 - 10/2019] , or refer to WORK PROCEDURE [10/2019 - 07/2020] , or refer to WORK PROCEDURE [07/2020 - ]
HINT:
To perform the simulation method, enter check mode (signal check) with the Techstream (Refer to CHECK MODE PROCEDURE [10/2014 - ] ), and then wiggle each connector of the airbag system or drive the vehicle on various types of road (Refer to DIAGNOSIS SYSTEM [10/2014 - ] ).