Installation [10/2014 - ]: Procedure

INSTALL HEADUP DISPLAY SWITCH ASSEMBLY

Attach the 4 claws to install the headup display switch assembly.

GTY514089

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSTALL NO. 1 SWITCH HOLE BASE
Refer to PROCEDURE - Step 18 [10/2014 - 09/2017] , or refer to PROCEDURE - Step 19 [09/2017 - 05/2019] , or refer to PROCEDURE - Step 19 [05/2019 - ]
INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
Refer to PROCEDURE - Step 19 [10/2014 - 09/2017] , or refer to PROCEDURE - Step 20 [09/2017 - 05/2019] , or refer to PROCEDURE - Step 20 [05/2019 - ]
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 20 [10/2014 - 09/2017] , or refer to PROCEDURE - Step 21 [09/2017 - 05/2019] , or refer to PROCEDURE - Step 21 [05/2019 - ]
INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Refer to PROCEDURE - Step 21 [10/2014 - 09/2017] , or refer to PROCEDURE - Step 22 [09/2017 - 05/2019] , or refer to PROCEDURE - Step 22 [05/2019 - ]
INSTALL INSTRUMENT SIDE PANEL LH
Refer to PROCEDURE - Step 22 [10/2014 - 09/2017] , or refer to PROCEDURE - Step 23 [09/2017 - 05/2019] , or refer to PROCEDURE - Step 23 [05/2019 - ]
INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH
Refer to PROCEDURE - Step 23 [10/2014 - 09/2017] , or refer to PROCEDURE - Step 24 [09/2017 - 05/2019] , or refer to PROCEDURE - Step 24 [05/2019 - ]
INSTALL CONSOLE ARMREST ASSEMBLY
Refer to PROCEDURE - Step 26 [10/2014 - 09/2017] , or refer to PROCEDURE - Step 27 [09/2017 - 05/2019] , or refer to PROCEDURE - Step 27 [05/2019 - ]