Tachometer Malfunction [09/2015 - ]: Procedure

1. Check for DTCs. Refer to DTC CHECK / CLEAR [09/2015 - ] ).
   RESULT
   
   

   Result	Proceed to
   CAN communication system DTC is not output	A
   CAN communication system DTC is output	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2015 - 08/2020] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2020 - ] )

Result: 

A 

See step  2

1. Operate the Techstream according to the display and select the Active Test. Refer to DATA LIST / ACTIVE TEST [09/2015 - 08/2017] , or refer to DATA LIST / ACTIVE TEST [08/2017 - ] ).
   COMBINATION METER
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Tachometer Operation	Tachometer	0, 1000, 2000, 3000, 4000, 5000, 6000 or 7000	Perform the test with the vehicle stopped and the engine idling.

   HINT: 

   Make sure that the vehicle is stopped and the engine is idling.

   OK

   Needle indication is normal.

Result: 

NG 

REPLACE COMBINATION METER ASSEMBLY 

Refer to REMOVAL [09/2015 - ] )

Result: 

OK 

See step  3

1. Operate the Techstream according to the display and select the Data List. Refer to DATA LIST / ACTIVE TEST [09/2015 - 08/2017] , or refer to DATA LIST / ACTIVE TEST [08/2017 - ] ).
   COMBINATION METER
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Engine Rpm	Engine speed/Min.: 0, Max.: 12750	Idling: 700 to 800	Unit: rpm

   OK

   Engine speed displayed on the Techstream is almost the same as actual engine speed.

Result: 

NG 

REPLACE COMBINATION METER ASSEMBLY 

Refer to REMOVAL [09/2015 - ] )

Result: 

OK 

See step  4

1. Operate the Techstream according to the display and select the Data List. Refer to DATA LIST / ACTIVE TEST [09/2015 - 08/2018] , or refer to DATA LIST / ACTIVE TEST [08/2018 - 08/2019] , or refer to DATA LIST / ACTIVE TEST [08/2019 - 08/2020] , or refer to DATA LIST / ACTIVE TEST [08/2020 - ] ).
   ENGINE
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Engine Rpm	Engine speed / Min.: 0, Max.: 16383.75	Idling: 700 to 800	Unit: rpm

   RESULT
   
   

   Result	Proceed to
   Engine speed displayed on Techstream is almost same as actual engine speed	A
   Engine speed displayed on Techstream is not same as actual engine speed	B

Result: 

A 

REPLACE COMBINATION METER ASSEMBLY 

Refer to REMOVAL [09/2015 - ] )

Result: 

B 

GO TO SFI SYSTEM 

Refer to PRECAUTION [09/2015 - ] )