DTC C13AE: System information not received [10/2020 - 10/2023]: Procedure

1. Turn the power switch off.
2. Connect the Techstream to the DLC3.
3. Turn the power switch on (IG) and the Techstream on.
4. Check for DTC.

   Refer to DTC CHECK / CLEAR [10/2020 - 10/2023]

   Chassis > Electric Parking Brake > Trouble Codes 

   Result

   Result	Proceed to
   DTC C13AE and a CAN communication malfunction DTC are output at the same time	A
   DTC C13AE is output and the master warning light is illuminated	B
   Only DTC C13AE is output	C
   No outputs	D

Result: 

A 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2020 - 11/2021]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2021 - 10/2023] 

Result: 

B 

GO TO HYBRID CONTROL SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2017 - 10/2023] 

Result: 

C 

REPLACE PARKING BRAKE ECU ASSEMBLY. Refer to  REMOVAL [10/2020 - 11/2021]  , or refer to  REMOVAL [11/2021 - 10/2022]  , or refer to  REMOVAL [10/2022 - 10/2023] 

Result: 

D 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2020 - 11/2021]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2021 - 10/2022]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - 10/2023]