Typical Enabling Conditions
C12FA AND C130C
| Monitor runs whenever the following DTCs are not stored | C130D: Brake pressure control solenoid main relay 2 short circuit |
| Either of the following conditions are met | - |
| Brake system voltage | Higher than 7 V |
| After main relay ON, main relay monitor on experience | Not existing |
C12FB AND C130D
| Monitor runs whenever the following DTCs are not stored | C0597 (Case 1): EEPROM malfunction C0597 (Case 2): Lost communication C0597 (Case 3 and 5): CPU malfunction C0597 (Case 4): IC malfunction |
| Command to main relay | Off |