Removal [10/2020 - 11/2021]: Procedure

PRECAUTION

WARNING:

Be sure to read Precaution thoroughly before servicing.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

w/ Advanced Park:

w/o Advanced Park:

NOTE:

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal.

DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

WARNING:

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

After disconnecting the cable from the negative (-) auxiliary battery terminal, wait for at least 60 seconds to start the operation.
If the airbag deploys for any reason, it may cause a serious accident.

REMOVE INSTRUMENT SIDE PANEL LH
Refer to PROCEDURE - Step 7
REMOVE LOWER NO. 1 INSTRUMENT PANEL PAD SUB-ASSEMBLY
Refer to PROCEDURE - Step 14
REMOVE INSTRUMENT SIDE PANEL RH
Refer to PROCEDURE - Step 11
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
Refer to PROCEDURE - Step 22
REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 12
REMOVE NO. 2 CONSOLE UPPER PANEL GARNISH
Refer to PROCEDURE - Step 4
REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY
Refer to PROCEDURE - Step 9
REMOVE GLOVE COMPARTMENT DOOR PAD PLATE
Refer to PROCEDURE - Step 31
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
Refer to PROCEDURE - Step 32

REMOVE LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY

Detach the claw and remove the luggage door opening cancel switch assembly.

Remove in this Direction