LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LS 500h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Vehicle Proximity Notification System - Service Information) >> Vehicle Approaching Speaker Ecu >> Removal [10/2017 - 09/2019] >> Procedure

Removal [10/2017 - 09/2019]: Procedure

WARNING: This page is about a different car, the 2020 Lexus LS 500h, 2019 Lexus LS 500h, and 2018 Lexus LS 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 3

  2. REMOVE INSTRUMENT SIDE PANEL RH 

    Refer to PROCEDURE - Step 4

  3. REMOVE LOWER NO. 1 INSTRUMENT PANEL PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 14 [09/2018 - 10/2020]

  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY 

    Refer to PROCEDURE - Step 21 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 21 [09/2018 - 10/2020]

  5. REMOVE VEHICLE APPROACHING SPEAKER CONTROLLER 
    1. Remove the 2 screws.
      GTY827100Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the guide and remove the vehicle approaching speaker controller.
      NOTE:
      • When removing the vehicle approaching speaker controller, take care not to damage it.
      • Do not reuse a vehicle approaching speaker controller that has been dropped or subjected to a strong shock.
scientia non olet · About LEMON Manuals