Typical Enabling Conditions
| Monitor runs whenever the following DTCs are not stored | C051C (Case 2 and 3): Acceleration sensor range/performance C051F: Acceleration sensor "A"/"B" correlation C0520 (Case 1): Acceleration sensor internal malfunction C1241 (Case 1 and 2): Brake system voltage circuit low C1241 (Case 3 and 4): Speed sensor voltage circuit low |
| All of the following conditions are met | - |
| Lost communication with yaw rate and acceleration sensor (yaw rate sensor) | Not detected |
| IG1 voltage | Higher than 9.5 V |
| Acceleration sensor fail (C051C, C051F, C0520) | Not detected |
| Yaw rate and acceleration sensor power supply voltage (IG) invalidation/validation (CAN communication data) | "0" (Valid) |