Removal [10/2020 - 11/2021]: Procedure
- REMOVE LUGGAGE COMPARTMENT FLOOR MAT
Refer to PROCEDURE - Step 24
- REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
Refer to PROCEDURE - Step 25
- REMOVE LUGGAGE COMPARTMENT TRIM COVER LH
Refer to PROCEDURE - Step 26
- REMOVE LUGGAGE COMPARTMENT TRIM COVER RH
Refer to PROCEDURE - Step 27
- REMOVE TOOL BOX
Refer to PROCEDURE - Step 28
- REMOVE INNER LOWER LUGGAGE COMPARTMENT TRIM COVER
Refer to PROCEDURE - Step 29
- REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Advanced Drive)
Refer to PROCEDURE - Step 30
- REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/ Advanced Drive)
HINT:
Use the same procedure described for the front luggage compartment trim cover (w/o Advanced Drive).
- REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Refer to PROCEDURE - Step 1
- REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER (w/o Advanced Drive)
Refer to PROCEDURE - Step 33
- REMOVE REAR LUGGAGE COMPARTMENT TRIM COVER (w/ Advanced Drive)
HINT:
Use the same procedure described for the rear luggage compartment trim cover (w/o Advanced Drive).
- REMOVE ROPE HOOK ASSEMBLY
Refer to PROCEDURE - Step 10
- REMOVE REAR FLOOR FINISH PLATE
Refer to PROCEDURE - Step 11
- REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
- REMOVE LUGGAGE CLOSER MOTOR ASSEMBLY
- Disconnect the connector.
Bolt Nut Connector - Remove the nut and 3 bolts.
- Detach the guide and remove the luggage closer motor assembly in the direction indicated by the arrow shown in the illustration.NOTE:
- While holding the luggage closer motor assembly, remove it.
- Do not drop the luggage closer motor assembly.
Remove in this Direction
- Disconnect the connector.