Installation [10/2022 - ]: Procedure

1. Install the No. 4 radio bracket with the 3 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 2.8 N.m (29 kgf/cm, 25 in.lbf) 

1. Install the No. 3 radio bracket with the 3 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 2.8 N.m (29 kgf/cm, 25 in.lbf) 

1. Attach the clamp and guide to install the switch wire.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	Clamp
   *b	Guide

1. Attach the clip to install the lower No. 2 instrument panel finish panel.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Connect the connector.

1. Connect each connector.
2. Attach the clip to temporarily install the radio receiver assembly with bracket as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction

3. Install the radio receiver assembly with bracket with the 4 bolts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 24 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 24 [10/2023 - ]

Refer to PROCEDURE - Step 32 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 32 [10/2023 - ]

1. Attach the clip and install the instrument side panel RH in the direction indicated by the arrow shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction

1. Attach the clip and install the instrument side panel LH in the direction indicated by the arrow shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction

Refer to INSTALLATION [10/2022 - 10/2023] , or refer to INSTALLATION [10/2023 - ]

HINT: 

When replacing the radio receiver assembly, perform registration.

Refer to REGISTRATION [10/2022 - ]