LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LS 500h AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display - Service Information >> Combination Meter >> Removal [10/2017 - 10/2020] >> Procedure

Removal [10/2017 - 10/2020]: Procedure

  1. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 

    Refer to PROCEDURE - Step 2 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 2 [09/2018 - 09/2019] , or refer to PROCEDURE - Step 2 [09/2019 - 10/2020]

  2. REMOVE INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 3

  3. REMOVE INSTRUMENT SIDE PANEL RH 

    Refer to PROCEDURE - Step 4

  4. REMOVE LOWER NO. 1 INSTRUMENT PANEL PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 14 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 14 [09/2018 - 10/2020]

  5. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 16 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 16 [09/2018 - 10/2020]

  6. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD 

    Refer to PROCEDURE - Step 17 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 17 [09/2018 - 10/2020]

  7. REMOVE INSTRUMENT PANEL SAFETY PAD INSERT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 20 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 20 [09/2018 - 10/2020]

  8. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY 

    Refer to PROCEDURE - Step 21 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 21 [09/2018 - 10/2020]

  9. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY 

    Refer to PROCEDURE - Step 23 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 23 [09/2018 - 10/2020]

  10. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 
    1. GTY819063Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here
      Remove in this Direction

      Detach the claw and guide as shown in the illustration.

    2. except Sport Package, w/ Illumination:
      GTY824573Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A except Sport Package, w/ Illumination
      Place Hands Here
      Remove in this Direction
      1. Disconnect the connector.
    3. Place both hands at the position shown in the illustration and pull towards the rear of the vehicle to detach the clip and guide and remove the instrument cluster finish panel assembly.
    4. GTY816324Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Disconnect the connector.

  11. REMOVE COMBINATION METER ASSEMBLY 
    1. except Sport Package:
      1. Detach the clamp.
        GTY786187Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *A w/ Illumination
      2. w/ Illumination:

        Detach the clamp.

      3. Remove the 4 screws.
      4. GTY793342Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        Remove in this Direction

        Pull in the direction of the arrow in the illustration and detach the pin and remove the combination meter assembly.

    2. for Sport Package:
      GTY836321Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Detach the clamp.
      2. Remove the 4 screws.
      3. GTY831641Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        Remove in this Direction

        Pull in the direction of the arrow in the illustration and detach the pin and remove the combination meter assembly.

    3. GTY816319Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Detach the wire harness clamp and disconnect the 2 connectors.