Inspection [10/2020 - ]: Procedure
- INSPECT CLOCK ASSEMBLY
- Check illumination.
Apply auxiliary battery voltage to the clock assembly and check that it illuminates.
*a Component without harness connected
(Clock Assembly)OK
Tester Connection Specified Condition G167-1 (B) - Auxiliary battery positive (+)
G167-2 (ACC) - Auxiliary battery positive (+)
G167-6 (E) - Auxiliary battery negative (-)
G167-7 (ILL-) - Auxiliary battery negative (-)Illuminates If the result is not as specified, replace the clock assembly.
- Check illumination.