LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LS 500 Base, RWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Power Outlets (Int) - Service Information >> POWER POINT SOCKET (for Console Box Front Side) >> Removal [12/2017 - 10/2022] >> Procedure

Removal [12/2017 - 10/2022]: Procedure

  1. REMOVE CONSOLE BOX PLATE 
    1. Using a moulding remover D, detach the clips, craws and guides and remove as shown in the illustration.
      GTY798038Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Moulding Remover D
    2. Disconnect the 3 connectors.
      GTY826304Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY 
    1. GTY818601Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
      Protective Tape

      Using a thin-bladed screwdriver with its tip wrapped with protective tape, detach the claw and remove the No. 1 power outlet socket assembly as shown in the illustration.

      NOTE:
      • Do not subject the No. 1 power outlet socket assembly to any strong impact (such as dropping).
      • If the No. 1 power outlet socket assembly is subjected to any strong impact, replace the No. 1 power outlet socket assembly with a new one.
  3. REMOVE NO. 1 POWER OUTLET SOCKET COVER 
    1. Detach the claw and remove the No. 1 power outlet socket cover as shown in the illustration.
      GTY828542Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
scientia non olet · About LEMON Manuals