Removal [12/2017 - ]: Procedure
- REMOVE VANITY MIRROR ASSEMBLY
- for Sliding Roof:
- Push the vanity mirror assembly towards the outside of the vehicle.
HINT:
Maintain the position pushed out towards the outside of the vehicle.
Push Direction - Insert moulding remover D as shown in the illustration and detach the claw towards the bottom of the vehicle.
HINT:
Align moulding remover D with the vanity mirror assembly and insert it so that it is perpendicular to the mirror.
*a Claw *b Moulding Remover D - Detach the claw.
Remove in this Direction - Pull in the direction indicated by the arrow shown in the illustration to detach the guide and remove the vanity mirror assembly.
Remove in this Direction
- Push the vanity mirror assembly towards the outside of the vehicle.
- for Panoramic Moon Roof:
- Push the vanity mirror assembly towards the outside of the vehicle.
HINT:
Maintain the position pushed out towards the outside of the vehicle.
Push Direction - Insert moulding remover D as shown in the illustration and detach the claw towards the bottom of the vehicle.
HINT:
Align moulding remover D with the vanity mirror assembly and insert it so that it is perpendicular to the mirror.
*a Claw *b Moulding Remover D - Detach the claw.
Remove in this Direction - Pull in the direction indicated by the arrow shown in the illustration to detach the guide and remove the vanity mirror assembly.
Remove in this Direction
- Push the vanity mirror assembly towards the outside of the vehicle.
- Disconnect the connector.
- for Sliding Roof: