DTC B2439-00: Headlight Source LH Malfunction; DTC B243A-00: Headlight RH Circuit [10/2023 - ]: Procedure
- CLEAR DTC
Result:
NEXT
See step 2
- CHECK FOR DTC
Pre-procedure1
- Turn ignition switch to ON.
- Operate the light control switch to turn on the low beam headlights and wait 10 seconds or more.
Procedure1
- Check for DTCs.
Body Electrical > Headlight Control > Trouble Codes
Result
Result Proceed to B2439-00 is not output A B2439-00 is output B Post-procedure1
- None
Result:
B
See step 8
Result:
A
See step 3
- CLEAR DTC
Result:
NEXT
See step 4
- CHECK FOR DTC
Pre-procedure1
- Turn ignition switch to ON.
- Operate the light control switch to turn on the low beam headlights and wait 10 seconds or more.
Procedure1
- Check for DTCs.
Body Electrical > Headlight Control (Sub) > Trouble Codes
Result
Result Proceed to B243A-00 is not output A B243A-00 is output B Post-procedure1
- None
Result:
A
USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2023 - ]
Result:
B
See step 5
- CHECK HEADLIGHT UNIT ASSEMBLY RH
- Interchange the headlight unit assembly RH with LH and connect the connectors.
HINT:
Refer to DISASSEMBLY [10/2020 - ]
Result
Proceed to NEXT
Result:
NEXT
See step 6
- Interchange the headlight unit assembly RH with LH and connect the connectors.
- CLEAR DTC
Result:
NEXT
See step 7
- CHECK FOR DTC
Pre-procedure1
- Turn ignition switch to ON.
- Operate the light control switch to turn on the low beam headlights and wait 10 seconds or more.
Procedure1
- Check for DTCs.
Body Electrical > Headlight Control (Sub) > Trouble Codes
Result
Result Proceed to B243A-00 is output A B243A-00 is not output B Post-procedure1
- None
Result:
A
REPLACE HEADLIGHT ECU SUB-ASSEMBLY RH. Refer to REMOVAL [10/2020 - ]
Result:
B
REPLACE HEADLIGHT UNIT ASSEMBLY RH. Refer to DISASSEMBLY [10/2020 - ]
- CHECK HEADLIGHT UNIT ASSEMBLY LH
- Interchange the headlight unit assembly LH with RH and connect the connectors.
HINT:
Refer to DISASSEMBLY [10/2020 - ]
Result
Proceed to NEXT
Result:
NEXT
See step 9
- Interchange the headlight unit assembly LH with RH and connect the connectors.
- CLEAR DTC
Result:
NEXT
See step 10
- CHECK FOR DTC
Pre-procedure1
- Turn ignition switch to ON.
- Operate the light control switch to turn on the low beam headlights and wait 10 seconds or more.
Procedure1
- Check for DTCs.
Body Electrical > Headlight Control > Trouble Codes
Result
Result Proceed to B2439-00 is output A B2439-00 is not output B Post-procedure1
- None
Result:
A
REPLACE HEADLIGHT ECU SUB-ASSEMBLY LH. Refer to REMOVAL [10/2020 - ]
Result:
B
REPLACE HEADLIGHT UNIT ASSEMBLY LH. Refer to DISASSEMBLY [10/2020 - ]