DTC B241C: VGRS Ecu [12/2017 - 10/2023]: Procedure

CHECK FOR DTC

Clear the DTCs.
Refer to DTC CHECK / CLEAR [12/2017 - 09/2018] , or refer to DTC CHECK / CLEAR [09/2018 - 10/2020] , or refer to DTC CHECK / CLEAR [10/2020 - 10/2023]

Body Electrical > AFS > Clear DTCs
Turn the engine switch on (IG) and wait for at least 10 seconds or more.

Check for DTCs.

Refer to DTC CHECK / CLEAR [12/2017 - 09/2018] , or refer to DTC CHECK / CLEAR [09/2018 - 10/2020] , or refer to DTC CHECK / CLEAR [10/2020 - 10/2023]

Body Electrical > AFS > Trouble Codes

OK

DTC B241C is not output.

Result

Proceed to
OK
NG

Result:

OK

USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2017 - 09/2018] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2018 - 10/2020] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2020 - 11/2021] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2021 - 10/2022] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - 10/2023]

Result:

NG

GO TO VARIABLE GEAR RATIO STEERING SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [12/2017 - 10/2023]