DTC P0335-31: Crankshaft Position Sensor "A" No Signal [12/2017 - 10/2022]: Description
This DTC is output when a malfunction has occurred in the engine pulse signal system from the ECM.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P0335-31 | Crankshaft Position Sensor "A" No Signal | When the engine is running and the engine speed is 500 rpm or higher and below 6000 rpm 3 seconds after the engine switch is turned on (ACC), the stereo component equalizer assembly detects a malfunction in the engine pulse signal system for 10 seconds or more continuously* |
|
HINT:
*: Malfunction monitoring is not performed during the following conditions to prevent erroneous detection.
- The battery voltage is less than 9.5 V.
- Before 3 seconds have elapsed after battery voltage has returned to normal.