Caution / Notice / Hint

NOTE:

Perform registration after replacing or removing and installing the ultrasonic sensor or clearance warning ECU assembly.
Refer to CALIBRATION [10/2020 - 10/2022] , or refer to CALIBRATION [10/2022 - 10/2023] , or refer to CALIBRATION [10/2023 - ]
If a DTC is detected again after the repair, turn the engine switch on (IG) and turn the parking support alert system on, and then clear the DTC.
Refer to DTC CHECK / CLEAR [10/2020 - 10/2023] , or refer to DTC CHECK / CLEAR [10/2023 - ]