Caution / Notice / Hint

NOTE:

Perform registration after replacing or removing and installing the ultrasonic sensor or clearance warning ECU assembly.
Refer to CALIBRATION [10/2020 - 10/2022] , or refer to CALIBRATION [10/2022 - 10/2023] , or refer to CALIBRATION [10/2023 - ]
If a DTC is detected again after the repair, turn the engine switch on (IG) and turn the parking support alert assist system on, and then clear the DTC.
Refer to DTC CHECK / CLEAR [10/2020 - 10/2023] , or refer to DTC CHECK / CLEAR [10/2023 - ]