Installation [10/2020 - ]: Procedure

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Hold Here

   While holding the positions shown in the illustration, attach the instrument panel passenger airbag assembly hook near the front of the vehicle to the airbag door wall near the front of the vehicle.

2. Slowly lower the instrument panel passenger airbag assembly to attach the instrument panel passenger airbag assembly hook near the rear of the vehicle to the airbag door wall near the rear of the vehicle.
3. Install the 2 screws.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 10

Refer to PROCEDURE - Step 11

Refer to INSTALLATION [10/2020 - 10/2022] , or refer to INSTALLATION [10/2022 - 10/2023] , or refer to INSTALLATION [10/2023 - ]

Refer to PROCEDURE - Step 2 [10/2020 - 10/2023] , or refer to PROCEDURE - Step 2 [10/2023 - ]

Refer to PROCEDURE - Step 11

Refer to WORK PROCEDURE [10/2020 - 10/2022] , or refer to WORK PROCEDURE [10/2022 - 10/2023] , or refer to WORK PROCEDURE [10/2023 - ]

HINT: 

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [10/2020 - 10/2023] , or refer to AUTOMATIC LEARNING CHART [10/2023 - ]

Refer to DTC CHECK / CLEAR [12/2017 - 10/2023] , or refer to DTC CHECK / CLEAR [10/2023 - ]

Refer to OPERATION CHECK [12/2017 - 11/2021] , or refer to OPERATION CHECK [11/2021 - 10/2023] , or refer to OPERATION CHECK [10/2023 - ]