LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2021 >> LS 500 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Diagnostic Codes (11 Of 14) >> SFI System >> DTC P1366-29: "E" Camshaft Position Actuator Bank 1 Signal Invalid; DTC P1367-29: "E" Camshaft Position Actuator Bank2 Signal Invalid [12/2017 - 10/2020] >> Description

DTC P1366-29: "E" Camshaft Position Actuator Bank 1 Signal Invalid; DTC P1367-29: "E" Camshaft Position Actuator Bank2 Signal Invalid [12/2017 - 10/2020]: Description

Refer to DTC P0010-01.

Refer to DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note
P1366-29 "E" Camshaft Position Actuator Bank 1 Signal Invalid Malfunction in diagnostic signal (VTM) of cam timing control motor with EDU assembly (bank 1) is detected for 3 seconds (1 trip detection logic).
  • Cam timing control motor with EDU assembly (bank 1)
  • Open or short in cam timing control motor with EDU assembly (bank 1) circuit
  • ECM
 Comes on DTC stored SAE: P1366
P1367-29 "E" Camshaft Position Actuator Bank2 Signal Invalid Malfunction in diagnostic signal (VTM) of cam timing control motor with EDU assembly (bank 2) is detected for 3 seconds (1 trip detection logic).
  • Cam timing control motor with EDU assembly (bank 2)
  • Open or short in cam timing control motor with EDU assembly (bank 2) circuit
  • ECM
 Comes on DTC stored SAE: P1367
scientia non olet · About LEMON Manuals